alloy steel seamless tubes
"
Tubo de acero retirado a frío inconsútil mecánico tubo de acero del tamaño ASTM A519 1045 de 6 - de 88m m OD
Product Name: ASTM A519 Cold Drawn Seamless Mechanical Tubing , Carbon and Alloy Mechanical Steel Tub Material:1010, 1020, 1026, 1045, 4130, 4140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On
EN10216-2 especificó el tubo de caldera inconsútil elevado de la temperatura
1. Product Name: EN10216-2 Seamless Carbon and Alloy Steel Tubes with Specified Elevated Temperature Properties 2. Size Range: OD: 10-256mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price Your special requirement is highly welcomed and will be fulfilled. We always provide highest quality seamless pipe/tube and best service. 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product
Presión media baja del tubo de acero retirado a frío inconsútil GB3087 para las calderas
GB3087 Low Medium Pressure Seamless Carbon Steel Pipes For Boilers Standard:GB3087 Seamless Carbon Steel Tubes for Low And Medium Pressure Boiler Steel Grade/Steel Material/Steel Number: Grade Chemical Analysis % C Si Mn Cr Ni Cu 10 0.07-0.13 0.17-0.37 0.35-0.65 ≤0.15 ≤0.30 ≤0.25 20 0.17-0.23 0.17-0.37 0.50-0.80 ≤0.25 ≤0.30 ≤0.25 Grade Mechanical Properties Rm/Mpa Rel/Mpa A/% WT≤16 WT＞16 10 335-475 205 195 ≥24 20 410-550 245 235 ≥20 Size Range: OD: 6-350mm WT:1-35mm Length:4
Material inconsútil máximo SAE4130/AISI4130 del tubo de taladro 80Mpa tamaño de grano de 9 grados
ASTM A519 SAE4130 AISI4130 seamless drill pipe for wire-line drill rods COLD DRAWN SEAMLESS ALLOY STEEL TUBES STEEL GRADE: SAE/AISI4130 SPECIFICATIONS: ASTM A519 WITH FOLLOWING REQUIREMENTS. MECHANICAL PROPERTIES Tensile Min 725MPa Yield Min 620MPa Elongation (50.8mmG.L) Min 15% Hardness 230-280 HB Condition Stress relieved. Straightness better than: 1 in 2000 MAX (1MM DEVIATION IN 2000MM) Eccentricity (Max) 5% Grain size ≥ 9 according to ASTM E112 Residual Hoop stress
Tubería de acero inoxidable TP316
ASTM A269/ASME SA269 Stainless steel 316L/S31603 seamless bright annealed tubing We always have stock of normal export size by materials 316L bright annealed: STOCK SIZE 4.76*0.71mm/4.76*0.89mm/4.76*1.24mm 6*1mm/6*1.5mm 6.35*0.71mm/6.35*0.89mm/6.35*1.24mm/6.35*1.65mm 7.94*0.71mm/7.94*0.89mm/7.94*1.24mm/7.94*1.65mm 9.53*0.71mm/9.53*0.89mm/9.53*1.24mm/9.53*1.65mm 10*1mm/10*1.5mm/10*2mm 12*1mm/12*1.5mm 12.7*0.71mm/12.7*0.89mm/12.7*1.24mm/12.7*1.65mm 14*1mm/14*1.5mm/14.1*2mm 15
Tubo de acero inoxidable recocido brillante del duplex de ASTM A789 S32760
ASTMA789 S32760 duplex bright annealed stainless steel tube Materials:USA S32760,S32205 2507 Application:For boiler pressure system 1. Commodity: seamless S32760 Duplex stainless steel tube 2. Process method: cold finished 3. Surface finish: annealing, pickling and polishing as required 4. Material Grades: S31803, S31500, S32205/SAF2205, S32304/SAF2304, S32750/SAF2507, S32760. 5. Specifications: ASTM A789,ASME SA/A789, SA/A790, EN10216-5, etc. 6. Size: A) NPS: 1/8" to 6" B)
longitud de las tuberías de acero 1000m m de Corten del grueso de 150m m Od 0.8m m
CORTEN A Steel is Corrosion Tensile Atmospheric Resistant Welded Steel Pipes and Steel Tubes Cor-Ten A atmospheric corrosion resistant welded pipes/ERW Steel Tubes COR-TEN A Steel is atmospheric corrosion resistant steel,Corrosion-Tensile Steel,high strength steel The purity of the steel of fine grade austenitic quality and the addition of special alloys, provide this steel , excellent mechanical characteristics, even at high temperatures and self-passivating properties when
ASTM A312/A213M TP304 pulió la tubería de acero inoxidable
ASTM A312/A312M TP304/TP304L Thin Wall Stainless Steel Tubing Thin wall thickess stainless tubes for precision roller Normal sizes:133x3mm;159x3.5mm;159x4.5mm;89x4mm Material Stainless Steel TP304/TP304L/TP316/TP316L Shape Round tubes/ Square tubes / Rectangle tubes/Profile tubes Production Standards ASTM A270, ASTM A269, ASTM A249, ASTM A778, ASTM A789, DIN 11850, EN 10357, EN 10217-7 Outer Diameter The normal stainless pipes sizes from 6mm - 300mm ; Thickness 0.8mm - 20 mm
ASTM A312/A213M TP304 pulió el tubo de acero inoxidable ISO9001
ASTM A312 / A213M TP304 Polished Stainless Steel Tube ISO9001 ASTM A312/A312M TP304/TP304L Thin Wall Stainless Steel Tubing Thin wall thickess stainless tubes for precision roller Normal sizes:133x3mm;159x3.5mm;159x4.5mm;89x4mm Material Stainless Steel TP304/TP304L/TP316/TP316L Shape Round tubes/ Square tubes / Rectangle tubes/Profile tubes Production Standards ASTM A270, ASTM A269, ASTM A249, ASTM A778, ASTM A789, DIN 11850, EN 10357, EN 10217-7 Outer Diameter The normal
