weldable steel tubing
"
Precisión alrededor de la tubería de acero soldable longitud de 1 - de los 200m para el condensador GB/T24187
GB/T24187 Cold Drawn Precision Welded Steel Coil Tubes for Condenser Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.5-1.2mm General Length:1-200m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0.0701
tubo de acero inconsútil retirado a frío 40Cr/41Cr4/5140, tubería de acero soldable de las piezas automotrices
Product Name: 40Cr / 41Cr4 / 5140 Seamless Cold Rolled Steel Tube for Automotive Parts Material: 40Cr / 41Cr4 / 5140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5.
Q195 la tubería de acero mecánica Erw soldó con autógena para la entrega líquida GB/T3091 de la presión baja
GB/T3091 Q195 ERW Welded Steel Pipes For Low Pressure Liquid Delivery Welded Steel Pipes Weled steel pipes for low pressure liquid delivery is also called general welded pipe, commonly known as the clarinet. It is used to transport oil, gas, air, water and heating steam and other general low pressure fluid and other purposes of welded steel pipe.Steel tube is divided into ordinary steel pipe and increasing pipe according towall thickness ;According to side form,it is divided
6 - la tubería de acero soldable de 168m m OD, tensión aliviada recoció el tubo de acero de la pared gruesa
Product Name: Carbon Steel Welded Tube Type 5 DOM Tube ASTM A513 / ASME SA513 Stress Relieved Annealed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel
Tubería de acero soldable de la resistencia eléctrica, tubo soldado con autógena de acero de carbono del grado SA178
Product Name: SA178 Grade A C D Electric Resistance Welded Carbon Steel Pipe Boiler and Superheater Tubes Size Range: OD: 12.7-127mm, WT: 0.9-9.1mm, Length: 5.8m/6m, maximal 11.8m Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and Safe ends Heat treatment: After welding, all tubes are heat treated at a temperature of 1650℉ (900℃) or higher and followed by cooling in air or in the cooling chamber of a controlled atmosphere
Tubos soldados con autógena retirados a frío soldados con autógena precisión de los tubos CDW del amortiguador de choque con la superficie interna lisa
Product Name: 32mm × 1mm Shock Absorber Precision Welded Pipes CDW Cold Drawn Welded Tubes with Smooth Inner Surface 1. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 2. Stable Quality with Comeptitive Price 3. Good Extending and Bending Ability EN10305-2 Welded Precision Steel Tubes, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is
Tubería de acero soldada con autógena precisión del estruendo 2393
1. Product Name: DIN2393 Precision Welded Cold Drawn Steel Tube for Automobile Industry 2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Good Extending and Bending Ability Product Name DIN2393 Precision Welded Cold Drawn Steel Tube Material RSt34-2, RSt37-2, St44-2, St52-3 Delivery Condition BK, BKW, BKS, GBK, NBK Standard DIN2393 Size Range OD: 6-88mm, WT: 1-10mm Application High precision purpose, auto parts,
Q195 laminó la tubería de acero soldada con autógena para la industria de la maquinaria tamaño de 6 - de 88m m OD
1. Product Name: Q195 Cold Rolled Welded Steel Tube Cold Worked for Machinery Purpose2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m3. Stable Quality with Comeptitive Price4. Good Extending and Bending Ability Product NameQ195 Cold Rolled Welded Cold Worked Steel TubeMaterialQ195, Q235Delivery ConditionBK, BKW, BKS, GBK, NBKStandardDIN2393 / ASTM A513Size RangeOD: 6-88mm, WT: 1-10mmApplicationHigh precision purpose, auto parts, oil cylinder, etcRound
Diámetro grande soldado con autógena precisión redonda de la tubería de acero para el cilindro de las piezas de automóvil/aceite
1. Product Name: DIN2393 Welded Cold Drawn Precision Steel Tube for Precision Application 2. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Good Extending and Bending Ability Product Name DIN2393 Welded Cold Drawn Precision Steel Tube Material RSt34-2, RSt37-2, St44-2, St52-3 Delivery Condition BK, BKW, BKS, GBK, NBK Standard DIN2393 Size Range OD: 6-100mm, WT: 1-10mm Application High precision purpose, auto
